Index | Diary

** Needs changing before new kernel written in spain 2017-07-08 ** Messages for package sys-fs/udev-233:

  • CONFIG_FW_LOADER_USER_HELPER:should not be set. But it is.
  • Please check to make sure these options are set correctly.

remove support for 64-bit kernel

A preallocated buffer-size of 2048 (kB) or higher is recommended for the HD-audio driver! CONFIG_SND_HDA_PREALLOC_SIZE=64



2014-11-07-udev-upgrade Title Upgrade to udev >= 217 or eudev >= 2.1 Author Samuli Suominen <> Posted 2014-11-07 Revision 1

sys-fs/udev-217 and sys-fs/eudev-2.1 no longer provide a userspace firmware loader. If you require firmware loading support, you must use kernel 3.7 or greater with CONFIG_FW_LOADER_USER_HELPER=n. No action is required if none of your kernel modules need firmware. See [1] for more information on the upgrade.


Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support (NEW)

.config:31:warning: symbol value 'm' invalid for X86_INTEL_PSTATE *.config:2289:warning: override: FB_MB862XX_LIME changes choice state *.config:2710:warning: symbol value 'm' invalid for AB3100_CORE *.config:2719:warning: symbol value 'm' invalid for MFD_WM8400 *.config:2720:warning: symbol value 'm' invalid for MFD_WM8350_I2C *.config:2721:warning: symbol value 'm' invalid for MFD_WM8350 *.config:2722:warning: symbol value 'm' invalid for MFD_WM831X *.config:3368:warning: symbol value 'm' invalid for POWER_SUPPL

Messages for package sys-kernel/genkernel-4.0.1:

  • Genkernel v4.x is a new major release which touches
  • nearly everything. Be careful, read updated manpage
  • and pay special attention to program output regarding
  • changed kernel command-line parameters!


  • Default kernel filename was changed from "kernel-genkernel-<ARCH>-<KV>"
  • to "vmlinuz-<KV>". Please be aware that due to lexical ordering the
  • default boot entry in your boot manager could still point to last kernel
  • built with genkernel before that name change, resulting in booting old
  • kernel when not paying attention on boot.

/search string The neat thing is you don’t have to remember or note the path, as you can just press the number between parenthesis on the left of the option location, in this case (1), and it will take you directly there.

Read more: